Skip to main content
1 of 14

Cygnus 26 Potting Vessel

£10,000
  • Located at Newcastle Upon Tyne
Contact Broker Value my boat Finance this boat
Year: 1997
LOA: 8.6m
Draft: 1.2m

Details

  • Make: Cygnus
  • Model: 26 Potting Vessel
  • Engine Make & Model: Reconditioned Sole Diesel HS150 - Requires fitting
  • Horsepower: 150
  • Fuel Type: Diesel
  • Price: £10,000
  • Location: In Newcastle Upon Tyne
  • Hull Construction: Fibreglass (GRP)
  • Drive Type: Shaft driven 3-Bladed Propeller

Dimensions

  • Beam: 2.97m
  • Draft: 1.2m
  • LOA: 8.6m
  • Builder: Cygnus Work Boats
  • Hull Type: Displacement

Summary

'Stroma' is a commercially built Cygnus 26 fishing vessel. Her current deck plan is for potting and she has a hydraulic pot hauler and aft pot storage rack with transom cut out for shooting. 
The boat is in a 'PROJECT' state and currently ashore where she was to be re-engined and re-decked. 
The original Perkins 4236M has been removed and a reconditioned Sole HS150 diesel has been purchased to replace it. Both engines are included in the sale but neither are fitted. 
The deck has been removed and requires a new deck to be installed. 
THERE IS NO LICENCE WITH THIS VESSEL.

Mechanical

There is a reconditioned Sole HS150 inboard diesel sitting on a pallet waiting to be installed. The original Perkins 4236M is also available. The engine bearers will need to be adjusted to fit the new diesel footprint. Shaft driven 3-bladed propeller.

Electrical

24V systems onboard. Batteries will need replacing once the new engine is installed

Navigation

  • Furuno GPS/WAAS Navigator
  • Furuno GP-39
  • ICOM ICM-421 DSC VHF
  • Furuno Navnet
  • Furuno Depth Sounder
  • Compass

Deck

  • Pot hauler
  • Deck boards
  • Anchor with chain and warp

Safety

  • Fire extinguishers
  • Grab Bag
  • Flare kits

Miscellaneous

  • Mooring warps
  • Fenders
  • Daylight shapes

Construction

GRP Construction with twin bilge runners. Marine ply deck which needs replacing and glassing in. Rear stainless steel frame.

Disclaimer

For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Unless otherwise stated on the specification sheet the following presumptions are made
- Sail drive and shaft seals are more than 5 years of age
- Fuel and gas hoses and regulators are over 5 years old
- Standing rigging and sails are more than 10 years old

Please note that as the broker/agent, we cannot guarantee or warrant the serviceability of any safety equipment included within the inventory, including but not limited to the condition, operation, or service dates of such equipment. It is the responsibility of the buyer to thoroughly inspect and assess the condition of all safety equipment prior to purchase.


NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.

Contact

boatpoint at Royal Quays Marina

newcastle@boatpoint.co.uk

0191 272 9086

Recommended Boats

Boatpoint

boatpoint at Royal Quays Marina

newcastle@boatpoint.co.uk

0191 272 9086

Cygnus 26 Potting Vessel - 1997£10,000

Located at Newcastle Upon Tyne

Summary

'Stroma' is a commercially built Cygnus 26 fishing vessel. Her current deck plan is for potting and she has a hydraulic pot hauler and aft pot storage rack with transom cut out for shooting. 
The boat is in a 'PROJECT' state and currently ashore where she was to be re-engined and re-decked. 
The original Perkins 4236M has been removed and a reconditioned Sole HS150 diesel has been purchased to replace it. Both engines are included in the sale but neither are fitted. 
The deck has been removed and requires a new deck to be installed. 
THERE IS NO LICENCE WITH THIS VESSEL.

Details:

Engine: Reconditioned Sole Diesel HS150 - Requires fitting

Horsepower: 150

Fuel Type: Diesel

Beam: 2.97m

Draft: 1.2m

Hull Construction: Fibreglass (GRP)

Drive Type: Shaft driven 3-Bladed Propeller

LOA: 8.6m

Builder: Cygnus Work Boats

Hull Type: Displacement

Mechanical

There is a reconditioned Sole HS150 inboard diesel sitting on a pallet waiting to be installed. The original Perkins 4236M is also available. The engine bearers will need to be adjusted to fit the new diesel footprint. Shaft driven 3-bladed propeller.

Electrical

24V systems onboard. Batteries will need replacing once the new engine is installed

Navigation

  • Furuno GPS/WAAS Navigator
  • Furuno GP-39
  • ICOM ICM-421 DSC VHF
  • Furuno Navnet
  • Furuno Depth Sounder
  • Compass

Deck

  • Pot hauler
  • Deck boards
  • Anchor with chain and warp

Safety

  • Fire extinguishers
  • Grab Bag
  • Flare kits

Miscellaneous

  • Mooring warps
  • Fenders
  • Daylight shapes

Construction

GRP Construction with twin bilge runners. Marine ply deck which needs replacing and glassing in. Rear stainless steel frame.

Disclaimer

For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Unless otherwise stated on the specification sheet the following presumptions are made
- Sail drive and shaft seals are more than 5 years of age
- Fuel and gas hoses and regulators are over 5 years old
- Standing rigging and sails are more than 10 years old

Please note that as the broker/agent, we cannot guarantee or warrant the serviceability of any safety equipment included within the inventory, including but not limited to the condition, operation, or service dates of such equipment. It is the responsibility of the buyer to thoroughly inspect and assess the condition of all safety equipment prior to purchase.


NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.

Additional Images