Skip to main content
1 of 14

Ribcraft 7.8

£24,950
  • Located at Penarth Marina
Contact Broker Value my boat Finance this boat
Year: 2012
LOA: 7.8m
Draft: 0.46m

Details

  • Make: Ribcraft
  • Model: 7.8
  • Engine Make & Model: Suzuki 250
  • Horsepower: 250
  • Fuel Type: Petrol
  • Price: £24,950
  • Location: In Penarth Marina
  • Keel: Other
  • Hull Construction: Hypalon
  • Drive Type: Outboard

Dimensions

  • Beam: 2.67m
  • Draft: 0.46m
  • LOA: 7.8m
  • Builder: Ribcraft
  • Designer: Ribcraft
  • Hull Type: Planing

Summary

Ribcraft 7.8 built 2012 – ideal for for commercial use in Cardiff Bay, fitted with a Suzuki 250hp outboard (approx 520 hours).
Relied upon by military and commercial users for its high level of stability, the 7.8 is also ideal for exploring and customizable for virtually any on-water activity.
The a long steep sheer towards the bow, an impressive deep V hull, and the highest of construction standards prove themselves time and time again to the most discerning boaters.
The internal composite grid system designed to ABS engineering standards makes the 7.8 incredibly strong yet surprisingly lightweight.
Built for commercial use regardless of the customer, the standard tube set found on the RIBCRAFT 7.8 features seven air chambers with pressure relief valves, overlapped and doubled up seams, and reinforcing points

Mechanical

Engines: 1
Make: Suzuki
Fuel: Unleaded
Engine Power: 250hp
Propeller Type: 3 Blade Stainless Steel
Engine Hours: approx. 520

Electrical

12v system
Dashboard switch panel
Spotlights

Navigation

Navigation lights
Raymarine Hybrid touch GPS plotter/Fishfinder
Fusion Hifi
Raymarine VHF DSC

Deck

Fenders & Mooring lines

Accommodation

Make: Ribcraft
Model: 7.8
Year: 2012
Construction: Fiberglass hull with Hypalon tubes
Dimensions
Length: 25'7 ft / 7.80 m
Length Overall: 25'7 ft / 7.80 m
Beam: 8'9 ft / 2.67 m
Min Draft: 1'6 ft / 0.46 m
6 x fibreglass saddle seats with stainless steel backrests and storage
Stainless steel radar arch with radar reflector, lifebouy racks and ski tow bollard
Centre consol with helm , electronics, front seat, storage, stainless steel grab rail and engine remotes and gauges
Front storage hatch with opening covers

Disclaimer

For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Unless otherwise stated on the specification sheet the following presumptions are made
- Sail drive and shaft seals are more than 5 years of age
- Fuel and gas hoses and regulators are over 5 years old
- Standing rigging and sails are more than 10 years old

Please note that as the broker/agent, we cannot guarantee or warrant the serviceability of any safety equipment included within the inventory, including but not limited to the condition, operation, or service dates of such equipment. It is the responsibility of the buyer to thoroughly inspect and assess the condition of all safety equipment prior to purchase.


NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.

Contact

boatpoint at Penarth Marina

penarth@boatpoint.co.uk

02920 713990

Recommended Boats

Boatpoint

boatpoint at Penarth Marina

penarth@boatpoint.co.uk

02920 713990

Ribcraft 7.8 - 2012£24,950

Located at Penarth Marina

Summary

Ribcraft 7.8 built 2012 – ideal for for commercial use in Cardiff Bay, fitted with a Suzuki 250hp outboard (approx 520 hours).
Relied upon by military and commercial users for its high level of stability, the 7.8 is also ideal for exploring and customizable for virtually any on-water activity.
The a long steep sheer towards the bow, an impressive deep V hull, and the highest of construction standards prove themselves time and time again to the most discerning boaters.
The internal composite grid system designed to ABS engineering standards makes the 7.8 incredibly strong yet surprisingly lightweight.
Built for commercial use regardless of the customer, the standard tube set found on the RIBCRAFT 7.8 features seven air chambers with pressure relief valves, overlapped and doubled up seams, and reinforcing points

Details:

Engine: Suzuki 250

Horsepower: 250

Fuel Type: Petrol

Beam: 2.67m

Draft: 0.46m

Keel: Other

Hull Construction: Hypalon

Drive Type: Outboard

LOA: 7.8m

Builder: Ribcraft

Designer: Ribcraft

Hull Type: Planing

Mechanical

Engines: 1
Make: Suzuki
Fuel: Unleaded
Engine Power: 250hp
Propeller Type: 3 Blade Stainless Steel
Engine Hours: approx. 520

Electrical

12v system
Dashboard switch panel
Spotlights

Navigation

Navigation lights
Raymarine Hybrid touch GPS plotter/Fishfinder
Fusion Hifi
Raymarine VHF DSC

Deck

Fenders & Mooring lines

Accommodation

Make: Ribcraft
Model: 7.8
Year: 2012
Construction: Fiberglass hull with Hypalon tubes
Dimensions
Length: 25'7 ft / 7.80 m
Length Overall: 25'7 ft / 7.80 m
Beam: 8'9 ft / 2.67 m
Min Draft: 1'6 ft / 0.46 m
6 x fibreglass saddle seats with stainless steel backrests and storage
Stainless steel radar arch with radar reflector, lifebouy racks and ski tow bollard
Centre consol with helm , electronics, front seat, storage, stainless steel grab rail and engine remotes and gauges
Front storage hatch with opening covers

Disclaimer

For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Unless otherwise stated on the specification sheet the following presumptions are made
- Sail drive and shaft seals are more than 5 years of age
- Fuel and gas hoses and regulators are over 5 years old
- Standing rigging and sails are more than 10 years old

Please note that as the broker/agent, we cannot guarantee or warrant the serviceability of any safety equipment included within the inventory, including but not limited to the condition, operation, or service dates of such equipment. It is the responsibility of the buyer to thoroughly inspect and assess the condition of all safety equipment prior to purchase.


NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.

Additional Images