Sadler Phoenix 27

£10,995

Located at Conwy Marina

Contact Broker Value my boat Finance this boat

Year: 1988

LOA: 8.3m

Berths: 4

Draft: 1.17m

Details

Make: Sadler
Model: Phoenix 27
Engine Make & Model: Yanmar 2GM20
Horsepower: 18
Fuel Type: Diesel
Price: £10,995
Location: In Conwy Marina
Keel: Fin
Hull Construction: Fibreglass (GRP)
Drive Type: Shaft

Dimensions

Beam: 2.77m
Draft: 1.17m
LWL: 7.32m
LOA: 8.3m
Displacement: 4250kg
Fuel Tank Capacity: 55l
Water Tank Capacity: 32l
Builder: Island Plastics / Sadler
Designer: David Sadler
Hull Type: Monohull

Summary

'Phoenix'. a Sadler Phoenix 27 designed by David Sadler from the mould of the Sadler Frigate 27 but with 7 inch deeper topsides giving more headroom . The hull was built in 1988 by Island Plastics and then dry stored until the boat was completed by a boat builder and launched in 1998. The engine was fitted in 1998 and the boat was not used until then. She is well equipped for cruising with autohelm and DSC VHF radio. All her lines lead to the cockpit for ease of single or short-handed sailing. All In all, she is a well-equipped cruiser which is capable of long distance cruising. Lying Conwy Marina, North Wales

Mechanical

Yanmar 2GM20 18hp inboard diesel engine, conventional shaft drive to a 3-bladed propeller.
Engine installed during fitout in 1998.
Wheel steering with Vetus hydraulic steering ram
Regular servicing to engine.

Electrical

2 x 12v Batteries (70ah & 88ah)
12v sockets
12v lighting
240v Shore power with Victron Blue Smart 12v 20w 3-output battery charger
Engine alternator
240v 3-pin double sockets

Water:
Pumped cold water supply

Rigging

Deck stepped single spreader masthead sloop
KEMP Aluminium mast and boom
Stainless steel standing rigging to include inner forestay - Replaced 2022
Running rigging - Replaced 2022
Slab reefed mainsail
Twin grove forestay with Pro-Furl C290 furling genoa drum
Spinnaker pole
Spinnaker deck gear
Lewmar deck clutches
All lines led aft

Sails:
Fully battened mainsail - Hood - Excellent condition
Genoa with sacrificial UV strip - Hood - Excellent condition
Jib - Hood - Excellent condition
Cruising Chute - Mouse Sails - Excellent condition
Storm jib

Winches:
2 x Lewmar 16 halyard winches
2 x Lewmar 40 self tailing genoa winches

Navigation

Cockpit:
Plastimo 105 Compass on the binnacle
Autohelm 4000 Wheelpilot autopilot
Stowe Wind Speed and Direction - above companionway hatch (Anemometer mot working - possible loose wire. There is a spare included)
Stowe Speed - above companionway hatch
Stowe Depth with anchor watch alarm - above companionway hatch

Below deck:
Autohelm 4000 control unit
Stowe Navigator 2 Depth and Wind repeater
Stowe hourmeter
Cobra Marine GPS DSC VHF radio c/w fixed antenna
Clock and Barometer

Navigation lights to include: bow, stern, deck and steaming, masthead

Deck

Anchor, chain, and warp
Seahorse manual windlass
Fenders
Mooring warps
Cleats
Teak laid cockpit seating
Teak cockpit capping
Non-slip deck
Cockpit cushions
Yacht legs
Auxiliary outboard bracket on pushpit

Safety

Bilge pump
Rescue sling
Horseshoe buoy
Echomax radar reflector (mast mounted) - New 2022

Canvas

Sprayhood with grab handle - New 2023
Mainsail cover/stack pack with lazy jacks - New 2023
Dodgers - New 2023

Accommodation

4 Berths in 2 cabins

Below there is 6ft 1ins of headroom and easy movement throughout the boat. The upholstery is very recent and in good condition. There is a pilot berth to port which is wide and comfortable. An infill to the saloon seating to starboard creates another wide single berth. A double is in the forecabin. There is hanging storage adjacent to the forecabin and opposite is the heads compartment with Blakes Lavac sea toilet.

Headlining and wood cabinets are all in good order.

The galley has a twin stainless steel sink with single manual tap. There is a Vanessa cooker with two burners, oven and grill. A cool box is on the starboard side of the companionway.

JVC stereo with speakers

Construction

Sadler Phoenix 27, Hull and superstructure built by Island Plastics in 1988 for Sadler Yachts to a design by David Sadler. Final fitout by professional boat builder completed in 1998.
GRP hull, deck, and superstructure
Shoal Fin keel with skeg hung rudder
Wheel steering

Disclaimer

For a full, detailed specification with additional photographs and direct contact details for the listing office visit our website

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Unless otherwise stated on the specification sheet the following presumptions are made
- Sail drive and shaft seals are more than 5 years of age
- Fuel and gas hoses and regulators are over 5 years old
- Standing rigging and sails are more than 10 years old

Please note that as the broker/agent, we cannot guarantee or warrant the serviceability of any safety equipment included within the inventory, including but not limited to the condition, operation, or service dates of such equipment. It is the responsibility of the buyer to thoroughly inspect and assess the condition of all safety equipment prior to purchase.

NOTE - Please ring our offices prior to visiting, as the boat may be unavailable for viewing or located at a different marina.